How to balance your grinding wheels correctly!
Guideline for initial balancing of a new grinding wheel pack
![1schritt schleifscheibenaufnahmen haimer | © HAIMER 1schritt schleifscheibenaufnahmen haimer | © HAIMER](/contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1585/image-thumb__1585__imageText/1Schritt.Schleifscheibenaufnahmen.jpg 1x, /contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1585/image-thumb__1585__imageText/1Schritt.Schleifscheibenaufnahmen@2x.jpg 2x)
Schritt 1
- Add first grinding wheel on arbor
- Add spacers
- Tighten nut
- Measure unbalance
- Correct unbalance (e.g. by axial drilling)
![2schritt schleifscheibenaufnahme haimer | © HAIMER 2schritt schleifscheibenaufnahme haimer | © HAIMER](/contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1586/image-thumb__1586__imageText/2Schritt-Schleifscheibenaufnahmen.jpg 1x, /contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1586/image-thumb__1586__imageText/2Schritt-Schleifscheibenaufnahmen@2x.jpg 2x)
Schritt 2
- Add 2nd grinding wheel on arbor
- Add position references marking on both grinding wheels
- Tighten nut
- Measure unbalance
- Correct unbalance (e.g. by axial drilling)
![3schritt schleifscheibenaufnahme haimer | © HAIMER 3schritt schleifscheibenaufnahme haimer | © HAIMER](/contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1587/image-thumb__1587__imageText/3Schritt_Schleifscheibenaufnahmen.jpg 1x, /contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1587/image-thumb__1587__imageText/3Schritt_Schleifscheibenaufnahmen@2x.jpg 2x)
Schritt 3
- Add 3rd grinding wheel to arbor
- Add position references marking on all three grinding wheels
- Tighten nut
- Measure unbalance
- Correct unbalance (e.g. by axial drilling)
-> Prebalancing finished
![4 schleifscheibenaufnahmn haimer | © HAIMER 4 schleifscheibenaufnahmn haimer | © HAIMER](/contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1588/image-thumb__1588__imageText/4Schritt_Schleifscheibenaufnahmen.jpg 1x, /contentseiten/HAIMER/Products/Balancing%20Technology/Machines/1588/image-thumb__1588__imageText/4Schritt_Schleifscheibenaufnahmen@2x.jpg 2x)
Schritt 4
- Dressing of complete grinding wheel
- Measure unbalance
- Correct unbalance (e.g. by balancing screws)
-> Fine-balancing finished