Hollow taper shank DIN 69893 HSK-A, HSK-E, HSK-F
The interface DIN 69893 has become the new standard for machining centres. The holder is clamped via its taper with flange contact surface. By doing so, a highly accurate centring and fixed axial position of the holder in the spindle is granted with a high repetitive accuracy when exchanging the tools. In the DIN 69893-1 HSK-A interface design an additional torque transmission takes place at the taper shank with drive keys. DIN 69893 HSK-A/HSK-E/HSK-F is mainly used in high-speed machining.
Technical specifications DIN 69893 - HSK tool holder
Hollow taper shank HSK-A · DIN 69893-1
- Tool holder surface hardness: 58 – 2 HRC
- Tensile strength in core min. 1000 N/mm2
- All functional surfaces fine machined
- More accurate than DIN
- Incl. bore for data chip Ø 10 mm
- Symmetric force transmission to clamping shoulder
- Precise drive slots on ther HSK
Maß [mm] | D1 | D2 max. | D3 | D4 | L1 | L2 min. | L3 | L4 | L5 | L6 | G | T1 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
HSK-A32 | 32 | 26 | 24,007 | 10 | 16 | 15 | 20 | 3,2 | 7,05 | 7 | M10 x 1 | 5,4 |
HSK-A40 | 40 | 34 | 30,007 | 10 | 20 | 15 | 20 | 4 | 8,05 | 7 | M12 x 1 | 5,3 |
HSK-A50 | 50 | 42 | 38,009 | 10 | 25 | 16 | 26 | 5 | 10,54 | 7 | M16 x 1 | 5,2 |
HSK-A63 | 63 | 53 | 48,010 | 10 | 32 | 16 | 26 | 6,3 | 12,54 | 7 | M18 x 1 | 5 |
HSK-A80 | 80 | 67 | 60,012 | 10 | 40 | 16 | 26 | 8 | 16,04 | 7 | M20 x 1,5 | 5 |
HSK-A100 | 100 | 85 | 75,013 | 10 | 50 | 16 | 29 | 10 | 20,02 | 7 | M24 x 1,5 | 4,9 |
HSK-125 | 125 | 111 | 95,016 | 10 | 63 | 16 | 29 | 12,5 | 25,02 | 7 | M30 x 1,5 | 4, |
Hollow taper shank HSK-E · DIN 69893-5
- Tool holder surface hardness: 58 – 2 HRC
- Tensile strength in core min. 1000 N/mm2
- All functional surfaces fine machined
- More accurate than DIN
- Without bore for data chip
- Symmetric force transmission to clamping shoulder
Maß [mm] | D1 | D2 max. | D3 | l1 | l2 min. | l3 | l4 | g |
---|---|---|---|---|---|---|---|---|
HSK-E25 | 25 | 20 | 19,006 | 13 | 10 | 10 | 2,5 | M8 x1 |
HSK-E32 | 32 | 26 | 24,007 | 16 | 15 | 20 | 3,2 | M10 x1 |
HSK-E40 | 40 | 34 | 30,007 | 20 | 15 | 20 | 4 | M12 x1 |
HSK-E50 | 42 | 42 | 38,009 | 25 | 16 | 26 | 5 | M16 x1 |
Hollow taper shank HSK-F · DIN 69893-6
- Tool holder surface hardness: 58 – 2 HRC
- Tensile strength in core min. 1000 N/mm2
- All functional surfaces fine machined
- More accurate than DIN
- Without bore for data chip
- Symmetric force transmission to clamping shoulder
Maß [mm] | D1 | D2 max. | D3 | L1 | L2 min. | L3 | L4 |
---|---|---|---|---|---|---|---|
HSK-F63 | 63 | 53 | 38,009 | 25 | 16 | 26 | 5 |
HSK-F80 Makino | 80 | 78 | 48,010 | 32 | 16 | 26 | 6,3 |